Okay. I open to advice at this point. I am making some small corrections to the shins and thighs. Basically, the sniper knee is scrapping against the thigh and the rivets on the ammo belt on the right thigh came off. So, while those are drying, I decided to take a picture of the top portion which is...

Another weekend down. A little bit closer to being finished. Since I had to work all weekend, I did not get much done, so I decided to focus on something that takes time to cure. Lucky for me, my plasti dip arrived earlier in the week, so I was able to work on the bucket. Along with cheese cloth, I ...

So my progress for this weekend is as follows: The biggest thing was I got the cover strips off the front of the shins and started moving them to the back. I was also able to get the cover strips on the back of the thighs as well. https://scontent.fmci1-2.fna.fbcdn.net/hphotos-xfl1/v/t1.0-9/12512279...

If you look at the picture, the left side (or part that would be on the inside of the leg) was lower than the right, so it did not look straight. Now, I get to fix it to look better. No pictures, but a quick update. I got the strips glued to the shins and now waiting for them to dry. While waiting, ...

Yes, I simply used the wrong strip. The strips are numbered but the instructions had them alphabeized. So, unless you are paying attention, it is easy to get them mixed up. The strips I used on the front of the shins need to be on the back. The good news is I get to fine tune the sniper knee now whi...

Well, just realized the shins have the wrong strips on them. So, after taking the strip and sniper knee off, I am back to square one on them. At least the belt is ready to go, so not a wasted weekend.

This weekend's progress. Shins left and right front strip glued and the sniper plate attached. I have not started on the backs yet. I am debating between velcro or elastic straps like ukwrath's. https://scontent.fmci1-2.fna.fbcdn.net/hphotos-xta1/v/t1.0-9/11701086_10156661085540096_51253194633720249...

I have not noticed any damage parts. With that said, there was very little protecting the individual pieces. They simply came in a plastic bag. So depending on handling during shipping, some parts get damaged. Most are scratches which can easily be fixed with ABS paste. Some have reported missing pa...

For the past couple of weeks, I have been working on an Anovos Stunt Build TK. https://scontent.fmci1-1.fna.fbcdn.net/hphotos-xfp1/t31.0-8/10286799_10156652269290096_3910170899684539129_o.jpg Here is the bucket https://scontent.fmci1-1.fna.fbcdn.net/hphotos-xtl1/v/t1.0-9/12717921_10156652269250096_9...