Page 1 of 1

HIC Build

Posted: Sun Dec 16, 2012 10:40 am
by Dwootan
I figured that winter is just around the corner, so I needed a winter project. The project is Han Solo in Carbonite aka HIC.

I was lucky enough to get into King Jawa's holiday run, so the build is primary the box. Here's one of KJ's photos:

Image

This will probably not be 100 % screen accurate. The control panels aka Volvo Instrument Clusters seem to be runnning around $1K for everything needed. So, I will either go with a style similar to the 1990's Prop Release or a custom design similar to the prop seen in the movies.

Now, I just have to decide on TESB or ROTJ style for the box.

Re: HIC Build

Posted: Sun Dec 16, 2012 2:56 pm
by madog5154
Cant wait to see your progress. :)

Re: HIC Build

Posted: Thu Dec 20, 2012 6:16 am
by Dwootan
Well I finally got all the measurements down. Now it's off to find a straight board!

Re: HIC Build

Posted: Fri Dec 21, 2012 9:49 pm
by Dwootan
Just remembered that I took photos of the HIC at the Star Wars In Concert event in KC (2009).

I'm liking these controls panels. While they might not be the hero panel, they add the needed detail.

Image

Image

Re: HIC Build

Posted: Fri Dec 21, 2012 11:21 pm
by merrick
Looking forward to seeing how this progresses!

Re: HIC Build

Posted: Tue Dec 25, 2012 7:29 pm
by Dwootan
I received some questions on how I am handling this build. So, I made a drawing detailing it.

Image

The brown colored items will be cut and constructed. Blue colored items will be cut and placed together. The white body parts will be secured to blue colored items. The black sections are hollowed. The measurements listed are close estimates.

Currently, I am debating the use of MDF boards or wood. I want the finish item to be light weight and strong enough to withstand handling. I will have to use a heat gun on any wood used. The main reason is the weather conditions, it will prevent warping of the wood. Of course, it will take some putty and primer to cover the wood grain.

Also, I'm waiting for the remaining snow to melt in my truck bed.

Re: HIC Build

Posted: Tue Jul 09, 2013 5:32 pm
by Dwootan
Trying to determine if I should invest in the actual instrument panel or use a similar panel that was imported into the US. There are 8 panels needed.

Here's the original hero panel:
Image

Image

That was made from a Volvo 343 / 345 panel:
Image

Here's a Volvo 240 panel, which has a similar look:
Image

Here's a Ford Truck panel, which has a similar look:
Image

Re: HIC Build

Posted: Tue Jul 09, 2013 8:48 pm
by Deadpool
Do you think you can splice them together, make one panel from the two?

Re: HIC Build

Posted: Wed Jul 10, 2013 5:11 pm
by Dwootan
Deadpool wrote:Do you think you can splice them together, make one panel from the two?
Something like that is what I'm thinking. Still debating it.

Once I get this figured out, the rest of the build should go pretty quickly.

Re: HIC Build

Posted: Thu Jul 11, 2013 6:58 am
by Nickel
You could buy one accurate cluster and then make resin casts of it.

Re: HIC Build

Posted: Fri Jul 12, 2013 10:33 pm
by Dwootan
Nickel wrote:You could buy one accurate cluster and then make resin casts of it.

That's where I'm having my problem. I can't seem to find anyone that has one; prop makers seem to be out or their molds are no longer good. :(