70th Explorers Garrison: Forums

My friend and I recently pre-ordered the Anovos TK kits but they don't come with boots or blasters.

Could anyone point us in the right direction for where we can find these pieces? We've been able to locate boots but haven't had any luck finding them without the seam in the front.

Thanks in advance for any help you can provide!

http://imperialboots.com great place for boots!

As for the blaster go on the TK forums and there are a couple of builders there or if you have the time and talent to build a kit and paint it yourself DoopyDoo's is good! All this can be found
http://www.whitearmor.net/forum/mobiquo ... on%3Dindex

Hi there 70th Explorers!
These links appear to be out of date, does anyone have any updated sources for approved boots and E-11 blaster?
I’d also really like to work on a Heavy blaster rifle to compliment my eventual kit.
Any help would be appreciated, thank you!
Robert

robertl0044 wrote: ↑Wed Jan 26, 2022 7:29 am Hi there 70th Explorers!
These links appear to be out of date, does anyone have any updated sources for approved boots and E-11 blaster?
I’d also really like to work on a Heavy blaster rifle to compliment my eventual kit.
Any help would be appreciated, thank you!
Robert

Imperial Boots should still be active. They do things in what they call "waves" which allows for like a week to order and then they spend the rest of the time completing the orders. By doing it that way they don't get behind on orders. Sometimes they'll keep things open a little longer though depending on how many orders come through.

Here is some blaster info:

I know people were going to Hellhound Props but they hit some snags and now the guy is getting help from FISD, so may be a bit before you can order from them.

If I remember right, Praetorian Blasters are the ones who got the molds from Hyperfirm after they went under. I just checked and their website is gone but the Facebook page is still up.

That being said here is the current list from FISD:

https://www.whitearmor.net/forum/topic/ ... iers-2021/

Troopercoola
https://www.facebook.com/Troopercoola
JMC E-11 kit casted from sterling parts.

Fieldmarshall - Aluminium
http://www.warmachinepaintball.com/onli ... -replicas/
http://blasterfactory.com/e-11-blaster-kits/

Imperial Warfighters - Rubber
https://www.facebook.com/Imperial-Warfi ... 4068972001

RS Props - Rubber
https://www.rspropmasters.com/store/san ... -new-hope/

Shear Tech - Rubber
https://www.facebook.com/sheartech

TK-14082’s - 3D Print
https://www.whitearmor.net/forum/topic/ ... -blasters/

Quest Designs - 3D Print
https://www.questdesigncanada.com/

Imperial Arms - 3D Print
https://www.etsy.com/ca/listing/7028008 ... 1096533255

Hello, thank you for the response and information I really appreciate the help, going thru this information. For some reason it wasn’t showing up on my end I just now saw it.

Thank you so much for being so helpful!
Robert

Happy Friday 70th Explorers!
Was wondering if there was another approved source for boots besides Imperial Boots, I just checked their site with the start of their wave and they only go up to size 13. Any suggestions on approved sources that can accommodate a larger size 16?
Than you, Robert.

Robert,

I'd give a try with Crowprops as they can do custom if I remember right: https://crowprops.bigcartel.com/products

Giovanni is highly recommended in the community as well! The boots will be under "Shoes".

Great, thank you for the feedback I just reached out to them, thank you