Page 1 of 2

Phase II Captain Rex (TCW) - Approved

Posted: Sun Dec 01, 2019 9:36 pm
by clonin_around
Hi! My name is Josh and I'm 17 and working on my Captain Rex armor. I already have a thread on the Clone Trooper Detachment Forums but I'm starting one up here to document progress as this is the area I'm in.

Here is where I am at now, and you can follow all previous progress over at: https://501stclonetroopers.com/forum/in ... ent-313947

Image
Image
Image
Image

I still have a lot of work left to do, but I cannot wait to hear your guy's opinions on this!! So excited to continue this journey!

Re: Phase II Captain Rex (Animated) WIP

Posted: Sun Dec 08, 2019 1:55 pm
by clonin_around
And here is the finished helmet! Now onto armor!! What do you all think??
Image
Image
Image
Image

Re: Phase II Captain Rex (Animated) WIP

Posted: Mon Dec 09, 2019 11:34 pm
by IcyTrooper
Very nice work!

Re: Phase II Captain Rex (Animated) WIP

Posted: Mon Feb 24, 2020 12:05 pm
by clonin_around
A week after my armor arrived, here is my trimming progress!

Image

The kit is from Imperial Surplus, and it mostly all vacu-formed ABS.
After receiving the kit I marked where to cut and began doing basic trimming. I understand it isn't final, I'm doing most of it and after glueing and filling (using Evercoat Gloss, a flexible bondo) I will do more work so the return edges all match nice and pretty!

Image
Image
Image

Most trimming began with score and snap (using a box cutter and then bending it back to snap it off), then using a dremel and hand sanding to make it all nice and neat.
What do you all think? Any notes?

Re: Phase II Captain Rex (Animated) WIP

Posted: Sat Feb 29, 2020 8:43 pm
by IcyTrooper
Definitely think that is the right way to go about it. Definitely measure 3 times and cut once haha. Score and snap makes some clean lines that's for sure, just make sure the scores are deep enough for a snap instead of tear. Won't be as critical though because you'll be filling and such but makes it easier.

Re: Phase II Captain Rex (Animated) WIP

Posted: Sun Mar 01, 2020 5:29 am
by bishopdonmiguel
Looking good! Love the tally marks on the helmet.

Re: Phase II Captain Rex (Animated) WIP

Posted: Mon Mar 02, 2020 8:07 am
by clonin_around
Thank you to you both! Score and snap, then dremel has been working really well and I've been getting much more comfortable with the trimming! Here is another weeks work:

Chest:
Image

Back:
Image

Cod:
Image

Butt:
Image

Diaper suspenders:
Image
Image

Hand Backs and Shoes Thingys:
Image

Heres to another week of work! Any tips or comments on what you see? Love to hear from you guys!

Re: Phase II Captain Rex (Animated) WIP

Posted: Mon Mar 09, 2020 6:52 am
by clonin_around
Another week, more work:

Finished trimming and was able to do a rough test fit in the armor. Some pieces came apart but was still able to get a good idea of what it felt like to be in the armor.
Image
Image
Image

After that I was able to CA Glue the diaper together, and I also glued together the ab pieces.
Image
Image

Also did some filling work using epoxy for the shoulder bells (to make a stronger fill than bondo in the larger crevice) and fiberglass for a large dent in my pauldron:
Image
Image

Making good progress! This next week is busy with school but I'm still hoping to make my April 29th deadline to hopefully apply for approved when I turn 18!

Re: Phase II Captain Rex (Animated) WIP

Posted: Sun Mar 22, 2020 5:21 pm
by clonin_around
So it's been awhile since my last update, but I've been working on the armor still! I did my seam filling using Evercoat Glaze, its a bondo that doesn't crack when flexing so it should hold up very well in the years to come. Also did another test fit, this time with a lot less tape! I don't have the harness system attached yet as I don't want to add velcro before paint but I'm super excited with how this is going!

Image
Image
Image

Any notes or tips from what you see? Can't wait to keep going!

Re: Phase II Captain Rex (Animated) WIP

Posted: Wed Apr 08, 2020 3:17 pm
by clonin_around
Paint progress! Before painting I went over each piece and ended up doing some 14-16 hours of sanding so I'm happy to begin laying down some color. So far just getting base colors and taking my time. Have yet to do the blue but it is the last paint layer before weathering!

Here is some of the pieces...
Image

Got some greeblies painted...
Image

And got the pauldron started (just a bit of weathering needed)...
Image

Can't wait to continue! Hope you're all well and healthy!

Re: Phase II Captain Rex (Animated) WIP

Posted: Sat Apr 11, 2020 5:53 pm
by IcyTrooper
Sorry I haven't responded sooner! It looks great!

Re: Phase II Captain Rex (Animated) WIP

Posted: Mon Apr 13, 2020 9:40 pm
by clonin_around
All good! I just did the weathering (if you wanna see it check out the link up at the top of this thread, there are some 20 photos and you'll see them all once I take full pictures in armor), and I can't wait to do the harnessing and foam and everything else!!

Re: Phase II Captain Rex (Animated) WIP

Posted: Tue Apr 14, 2020 11:13 pm
by clonin_around
Alright so today I was able to add in vecro and the strapping and get things all lined up as well as begin the kama. Here are some photos of the assembly!

Everything back on the floor:
Image

Getting the biceps and shoulders on the harness:
Image

Getting the legs all strapped up:
Image

A look at the helmet over the chest piece:
Image

Pauldron all assembled:
Image

Began work on fitting the kama:
Image

So far I'm super happy with how this build is progressing, any comments? I'd love to hear your thoughts!
I'm super excited to begin trooping with you come that time again. Hope you're all well and healthy!

Re: Phase II Captain Rex (Animated) WIP

Posted: Wed Apr 15, 2020 10:14 pm
by clonin_around
Continued work on fitting the kama, here was my first full test fit:
Image

After that I rounded the edges, made marks 2" vertically and 4.5" horizontally and then rounded the edges meeting at those endpoints:
Image

Now to stitch on the blue!

Re: Phase II Captain Rex (Animated) WIP

Posted: Fri Apr 17, 2020 6:19 am
by bishopdonmiguel
Stunning! Amazing work.